Hello,

I m trying to add some condition on Question validation equation for Array Number with 22 lines and 10 columns but after I push the Save button the condition didn t get save. This is the condition I added:


(mq_SQ01_SQ01==1 AND (sum(mq_SQ03_SQ01,mq_SQ04_SQ01,mq_SQ05_SQ01,mq_SQ06_SQ01,mq_SQ07_SQ01,mq_SQ08_SQ01,mq_SQ09_SQ01,mq_SQ10_SQ01,mq_SQ11_SQ01,mq_SQ12_SQ01,mq_SQ13_SQ01)))

I mention that I test with array number columns 2, rows 2 and works to add it.
My limesurvey is Version 4.1.8+200302.

I also tried on Version 4.2.3+200511 and I encountered the same issue.

Hi,
1. I could not reproduce; it is saved.

2. Is your equation
(mq_SQ01_SQ01==1) AND (sum(mq_SQ03_SQ01,mq_SQ04_SQ01,...)==111)
In this case your synatx is wrong, if it isn't just a typo.

Joffm

Hi,
I think I wrong copy paste on forum.
I took an array number structure with smaller numbers of lines and columns and added condtion and it works, after I added more lines to be 22 lines/rows it didn't work, neither to delete the old condition. So the condition remain blocked there. So after having more numbers of rows (on my case 22) I think the validation (Question validation equation ) remains is nonfunctional.

So,
please provide the entire validation equation you want to enter.

Joffm

sum(tabela1_l2_c1,tabela1_l2_c2,tabela2_l1_c3,tabela1_l2_c4,tabela1_l2_c5,tabela1_l2_c6,tabela1_l2_c7,tabela1_l2_c8,tabela1_l2_c9,tabela1_l2_c10,tabela1_l2_c11,
tabela1_l2_c12,tabela1_l2_c13)==100

Hi,
well this is absolutely different from your first equation.

Here you seem to sum up the values of one subquestion. Before you summed up one column.

Now:
1. Is this correct?
sum(tabela1_l2_c1,tabela1_l2_c2,tabela2_l1_c3,tabela1_l2_c4,tabela1_l2_c5,tabela1_l2_c6,tabela1_l2_c7,tabela1_l2_c8,tabela1_l2_c9,tabela1_l2_c10,tabela1_l2_c11,
tabela1_l2_c12,tabela1_l2_c13)==100

2. Are c1 to c13 all columns?
If yes, why not shorten to "sum(self.sq_I2_c)==100"?

Assuming this I will check your issue later.

Joffm

Hi,

So I tested your issue, and found out.

I had to increase the "max_input_vars" in php.ini. I set it to 5000.

Then I see this, which works as desired.



and





Joffm

P.S.
Read about this here
www.limesurvey.org/manual/ExpressionScri....22that.22_variables

Thank you